WidthInformation about the width, i.e. the horizontal side of the device when it is used in its standard orientation.72.5 mm (millimeters)7.25 cm (centimeters)0.24 ft (feet)2.85 in (inches)HeightInformation about the height, i.e. the vertical side of the device when it is used in its standard orientation.142 mm (millimeters)14.2 cm (centimeters)0.47 ft (feet)5.59 in (inches)ThicknessInformation about the thickness/depth of the device in different measurement units.8.1 mm (millimeters)0.81 cm (centimeters)0.03 ft (feet)0.32 in (inches)WeightInformation about the weight of the device in different measurement units.145 g (grams)0.32 lbs (pounds)5.11 oz (ounces)VolumeEstimated volume of the device, calculated from the dimensions provided by the manufacturer. Applies for devices in the form of a rectangular parallelepiped.83.39 cm³ (cubic centimeters)5.06 in³ (cubic inches)ColorsInformation about the colors, in which the device is available in the market.BlackBlueGoldWhiteBody materialsMaterials used in the fabrication of the device’s body.PolycarbonateCertificationInformation about the standards, in which the device is certified.IP67 GSMGSM (Global System for Mobile Communications) was developed to replace the analog cellular network (1G), therefore it is referred to as a 2G mobile network. It has been improved with the addition of General Packet Radio Services (GPRS) and later via the Enhanced Data rates for GSM Evolution (EDGE) technology.GSM 850 MHzGSM 900 MHzGSM 1800 MHzGSM 1900 MHzUMTSUMTS stands for Universal Mobile Telecommunications System. Based on the GSM standard, it is deemed as a 3G mobile network standard. It has been developed by the 3GPP and its major advantage is the provision of greater bandwidth and spectral efficiency, due to the W-CDMA technology.UMTS 850 MHzUMTS 900 MHzUMTS 1900 MHzUMTS 2100 MHzLTELTE is deemed to be the fourth generation (4G) of mobile communications technology. It has been developed by the 3GPP based on the GSM/EDGE and UMTS/HSPA technologies in order to increase the speed and capacity of wireless data networks. A further development of the technology is called LTE Advanced.LTE 800 MHzLTE 850 MHzLTE 900 MHzLTE 1800 MHzLTE 2100 MHzLTE 2600 MHz SoCThe SoC integrates different hardware components such as the CPU, GPU, memory, peripherals, interfaces, etc., as well as software for their functioning.Qualcomm Snapdragon 801 MSM8974ACCPUCPU is the Central Processing Unit or the processor of a mobile device. Its main function is to interpret and execute instructions contained in software applications.Krait 400CPU coresA CPU core is the processor unit, which executes software instructions. Presently, besides single-core processors, there are dual-core, quad-core, hexa-core and so on multi-core processors. They increase the performance of the device allowing the execution of multiple instructions in parallel.4CPU frequencyThe frequency of the processor describes its clock rate in cycles per second. It is measured in Megahertz (MHz) or Gigahertz (GHz).2500 MHz (megahertz)GPUGPU is a graphical processing unit, which handles computation for 2D/3D graphics applications. In mobile devices GPU is usually utilized by games, UI, video playback, etc. GPU can also perform computation in applications traditionally handled by the CPU.Qualcomm Adreno 330GPU coresSimilar to the CPU, the GPU consists of processing units called cores. They handle the computation of graphics in various applications.4GPU frequencyThe frequency is the clock rate of the graphic processor (GPU), which is measured in Megahertz (MHz) or Gigahertz (GHz).578 MHz (megahertz)RAM capacityRAM (Random-Access Memory) is used by the operating system and all installed applications. Data in the RAM is lost after the device is turned off or restarted.2 GB (gigabytes)RAM typeInformation about the type of RAM used by the device.LPDDR3RAM channelsInformation about the number of RAM channels integrated in the SoC. More channels mean higher data transfer rates.Double channelRAM frequencyRAM frequency relates directly to the rate of reading/writing from/in the RAM memory.933 MHz (megahertz) Type/technologyOne of the main characteristics of the display is its type/technology, on which depends its performance.Super AMOLEDDiagonal sizeIn mobile devices display size is represented by the length of its diagonal measured in inches.5.1 in (inches)129.54 mm (millimeters)12.95 cm (centimeters)WidthApproximate width of the display2.5 in (inches)63.51 mm (millimeters)6.35 cm (centimeters)HeightApproximate height of the display4.45 in (inches)112.9 mm (millimeters)11.29 cm (centimeters)Aspect ratioThe ratio between the long and the short side of the display1.77816:9ResolutionThe display resolution shows the number of pixels on the horizontal and vertical side of the screen. The higher the resolution is, the greater the detail of the displayed content.1080 x 1920 pixelsPixel densityInformation about the number of pixels per centimeter (ppcm) or per inch (ppi) of the display. The higher the pixel density, the more detailed and clearer is the information displayed on the screen.432 ppi (pixels per inch)169 ppcm (pixels per centimeter)Color depthThe color depth of the display is also known as bit depth. It shows the number of bits used for the color components of one pixel. Information about the maximum number of colors the screen can display.24 bit16777216 colorsDisplay areaThe estimated percentage of the screen area from the device’s front area.69.87 % (percent)Other featuresInformation about other functions and features of the display.CapacitiveMulti-touchScratch resistantCorning Gorilla Glass 3 Sensor modelInformation about the manufacturer and the model of the image sensor used by the camera of the device.Samsung S5K2P2XXSensor typeDigital cameras use image sensors for taking photos. The sensor characteristics are some of the main factors determining the quality of the camera integrated in the mobile device.ISOCELLSensor sizeInformation about the dimensions of the image sensor used in the device. Usually cameras with larger sensors and less pixel density tend to provide better image quality despite the lower resolution.5.95 x 3.35 mm (millimeters)0.27 in (inches)Pixel sizeA smaller pixel size allows the image sensor to use more pixels thus providing better image resolution. On the other hand, this may negatively impact noise levels and decrease image quality at high ISO settings.1.12 µm (micrometers)0.00112 mm (millimeters)Crop factorCrop factor is the ratio of the dimensions of a full frame camera’s sensor (36 x 24 mm, which equals the frame size of a 35 mm film) and the dimensions of the image sensor of the device. The number shown is the ratio between the diagonals of a full frame sensor (43.3 mm) and the device sensor.6.34ISOISO rating indicates the light sensitivity of the image sensor. The lower the number, the less sensitive to light the image sensor is and vice versa – higher ISO ratings indicate higher sensitivity and ability of the image sensor to work better in low light conditions.100 – 2000ApertureAperture (f-stop number) indicates the size of the lens diaphragm opening, which controls the amount of light reaching the image sensor. The lower the f-stop number, the larger the diaphragm opening is.f/2.2Shutter speedShutter speed is also called exposure time and shows the time, during which the shutter of the camera is open, while taking a photo. The longer the shutter is open, the more light reaches the sensor. Shutter speed is measured in seconds (i.e. 5, 2, 1) or in parts of a second (i.e. 1/2, 1/8, 1/8000).1/14 – 1/10000Focal lengthFocal length is the distance in millimeters from the focal point of the image sensor to the optical center of the lens. A focal length, which results in the same field of view on a full-frame (35 mm) camera, is also provided.4.89 mm (millimeters)30.99 mm (millimeters) *(35 mm / full frame)Flash typeCameras of mobile devices use mainly a LED or a Xenon flash. The LED flash has a softer burst of light and in contrast to the much brighter Xenon flash, is used for recording videos as well.LEDImage resolutionOne of the main characteristics of the cameras of mobile devices is their resolution, which shows the number of pixels on the horizontal and vertical dimensions of the image.5312 x 2988 pixels15.87 MP (megapixels)Video resolutionInformation about the maximum resolution available for shooting a video with the device.3840 x 2160 pixels8.29 MP (megapixels)Video FPSInformation about the maximum number of frames per second (fps), supported by the device while recording a video at maximum resolution. Some of the main standard frame rates for recording and playing video are 24p, 25p, 30p, 60p.30 fps (frames per second)FeaturesInformation about additional software and hardware features of the privamery camera, which improve its overall performance.AutofocusContinuous shootingDigital zoomDigital image stabilizationGeotaggingPanoramaHDRTouch focusFace detectionWhite balance settingsISO settings1080p @ 60 fpsPhase detectionSamsung lens Connector typeThere are several USB connector types: the Standard one, the Mini and Micro connectors, On-The-Go connectors, etc. Type of the USB connector used by the device.Micro USBVersionThere are several versions of the Universal Serial Bus (USB) standard: USB 1.0 (1996), the USB 2.0 (2000), the USB 3.0 (2008), etc. With each following version the rate of data transfer is increased.3.0FeaturesТhe USB interface in mobile devices may be used for different purposes such as battery charging, using the device as a mass storage, host, etc.ChargingHostMass storageOn-The-Go Audio file formats/codecsList of some of the most common audio file formats and codecs supported standardly by the device.AAC (Advanced Audio Coding)AAC+ / aacPlus / HE-AAC v1AMR / AMR-NB / GSM-AMR (Adaptive Multi-Rate, .amr, .3ga)eAAC+ / aacPlus v2 / HE-AAC v2FLAC (Free Lossless Audio Codec, .flac)M4A (MPEG-4 Audio, .m4a)MIDIMP3 (MPEG-2 Audio Layer II, .mp3)OGG (.ogg, .ogv, .oga, .ogx, .spx, .opus)WMA (Windows Media Audio, .wma)WAV (Waveform Audio File Format, .wav, .wave) Video file formats/codecsList of some of the most common video file formats and codecs supported standardly by the device.3GPP (3rd Generation Partnership Project, .3gp)3GPP2 (3rd Generation Partnership Project 2, .3g2)AVI (Audio Video Interleaved, .avi)DivX (.avi, .divx, .mkv)Flash Video (.flv, .f4v, .f4p, .f4a, .f4b)H.263H.264 / MPEG-4 Part 10 / AVC videoMKV (Matroska Multimedia Container, .mkv .mk3d .mka .mks)MP4 (MPEG-4 Part 14, .mp4, .m4a, .m4p, .m4b, .m4r, .m4v)VC-1WebMWMV (Windows Media Video, .wmv)WMV7 (Windows Media Video 7, .wmv)WMV8 (Windows Media Video 8, .wmv) CapacityThe capacity of a battery shows the maximum charge, which it can store, measured in mili-Ampere hours.2800 mAh (milliampere-hours)TypeThe battery type is determined by its structure and more specifically, by the chemicals used in it. There are different battery types and some of the most commonly used in mobile devices are the lithium-ion (Li-Ion) and the lithium-ion polymer battery (Li-Polymer).Li-Ion2G talk time2G talk time is the time period a battery charge will last, if one is constantly talking on the phone in a 2G cellular network.29 h (hours)1740 min (minutes)1.2 days2G stand-by time2G stand-by time is the longest time a battery charge will last, if the device is not used but is constantly connected to the 2G cellular network.480 h (hours)28800 min (minutes)20 days3G talk time3G talk time is the time period a battery charge will last, if one is constantly talking on the phone in a 3G cellular network.29 h (hours)1740 min (minutes)1.2 days3G stand-by time3G stand-by time is the longest time a battery charge will last, if the device is not used but is constantly connected to the 3G mobile network.480 h (hours)28800 min (minutes)20 days4G talk time4G talk time is the time period a battery charge will last, if one is constantly talking on the phone in a 4G cellular network.29 h (hours)1740 min (minutes)1.2 days4G stand-by time4G stand-by time is the longest time a battery charge will last, if the device is not used but is constantly connected to the 4G mobile network.480 h (hours)28800 min (minutes)20 daysFeaturesInformation about some additional features of the device’s battery.Wireless chargingRemovableWireless charging – market dependent Head SAR (EU)The SAR head rating shows the highest level of exposure to electromagnetic radiation measured when the device is held next to the ear in a talk position. In Europe, the SAR limit for hand-held mobile devices is set to 2 W/kg per 10 g of tissue. This standard is specified by the CENELEC, complies with the IEC standards and follows the ICNIRP Guidelines 1998.0.562 W/kg (watts per kilogram)Body SAR (EU)This SAR rating shows the highest level of exposure to electromagnetic radiation measured when the device is placed at the hip level. The top SAR value for mobile devices used in Europe is limited to 2 W/kg per 10 g of tissue. This standard follows the ICNIRP Guidelines 1998 as well as the IEC standards and is determined by the CENELEC.0.406 W/kg (watts per kilogram)Head SAR (USA)This SAR rating shows the maximum level of exposure to electromagnetic radiation taken when the device is placed next to the ear. The applicable limit for the US is 1.6 W/kg per 1 g of tissue. In the US the FCC tests and sets the SAR limits for all mobile devices, which are controlled by the CTIA.1.2 W/kg (watts per kilogram)Body SAR (USA)The SAR body rating shows the maximum level of exposure to electromagnetic radiation when the device is positioned against the body at the hip. The highest SAR value of mobile devices allowed in the US is set to 1.6 W/kg per 1 g of tissue. It is specified by the FCC and the CTIA follows whether the mobile devices comply with this standard.1.58 W/kg (watts per kilogram)
